JOY inflatable inflatable race arch factory price for child

Company Advantages
1. The production of JOY inflatable custom inflatable arch is paid continuous and in-depth attention to meet customers' needs.
2. It is qualified with many international certification.
3. Owing to the professional technology, JOY inflatable offers the best value for money.
4. It is admitted that good quality inflatable race arch can win the common recognition of customers.

All kinds outside activities

1.For party event     2. wedding       3. As a store       4.exhibition 

Technology : Sewing : we adopt special double needle strong thread sewing anywhere and quadruple stitching in positions sustaining much force and pressure for the inflatable arch  .

How to install  the inflatable arch?                                                                                                                                                            

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-Sale service 

Company Features
1. JOY inflatable series is noted for a stable quality.
2. Guangzhou JOY Inflatable Limited has gained is fame for its strong research and solid technical base.
3. Guangzhou JOY Inflatable Limited insists that quality is more important than productivity. Contact us! Take every chance to achieve the value is the dream of every staff in JOY inflatable. Contact us! Guangzhou JOY Inflatable Limited suggests custom inflatable arch as its market strategy. Contact us! Guangzhou JOY Inflatable Limited adhere to the strategic tenet of inflatable finish line . Contact us!