JOY inflatable inflatable outdoor tent company for child

Company Advantages
1. JOY inflatable inflatable military shelter is strictly designed by our pre-press department which is equipped with the most modern design software such as CAD software. JOY can customize the specification, package, color and height of the products
2. When applied in the building industry, this product is seen by architects more eco-friendly than traditional buildings such as those made from brick and cement. What's more, our products are anti UV
3. inflatable outdoor tent is manufactured based on high-quality materials and special processing technique. It is resistant to high temperature, impact, slip, crack, and fade. It is safe and eco-friendly which enjoys a wide reputation in the market.

All kinds outside activities.  1.For medical event.  2. emergency .   3.military

heat welding machine : High precision heat welding machine and elaborated welding work for the water park  .we can perfectly seal all the material pieces together into any reasonable inflatables, and heat weld all of our airtight inflatables with top quality standard with high efficiency

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free to desige fee.
2、free repair material and repair video.

Company Features
1. Guangzhou JOY Inflatable Limited's core competitiveness lies in its technical strength and rich manufacturing experience.
2. With rich experience and mature technical products, Guangzhou JOY Inflatable Limited enjoys a high reputation in the domestic and foreign markets.