JOY inflatable inflatable marquee tent personalized for outdoor

Company Advantages
1. In JOY inflatable inflatable marquee for sale production process, strict quality testing is carried out. These tests include yarn density, gram weight, structural strength, fabric shrinkage, tear strength, etc. Our products have been sold to over 60 countries including Japan, France, America and etc
2. The product can considerably help increase the accuracy of employees' output. By using this product, they are not likely to make mistakes. Excellent tensile and tear also makes our products outstanding
3. The product is assured to meet the highest quality standards in the industry. We can print your logo, slogan or other information you ask for
4. The quality of the product is under the guarantee of international certificates. Our well-selected materials are good enough to satisfy the standards of EN71
5. To ensure its quality, JOY inflatable inflatable marquee for sale is examined on various parameters at every level of production. And our products can be installed very easily

All kinds outside activities

1.For party event     2. wedding       3. As a store       4.exhibition 

Air tight technology: Welder by Miller machine in high steam and reinforcement at joint part .

Features:100% waterproof ;only once inflate ,airtight

How to install Inflatable Air beam Military Tents  ?                                                                                                                                                   

1.Base fabric is laid on the ground and put the inflatable tent on the base fabric and then to inflate the inflatable tent . During the inflation process, the two inflation valves must be inflated at the same time to ensure the simultaneous expansion of each part, and the air columns are not allowed to be knotted. If there is a lack of airflow in the air column, you can use your hand to gently tap a few times. When the air column is raised, several people can help it stretch, and lift the inflatable tent up, prompting the air column to stand up quickly.
2. For the first time of inflating, the air pressure is not allowed to exceed 13.3kpa. After the gas column is fully expanded after 5 mins, the air pressure is raised, but the maximum pressure is not allowed to exceed 20kpa. The inflation pressure can be appropriately increased or decreaed according to the ambient temperature. .

1. Check the leak point:
First, clean up the gas column and apply the surface with soapy water to check the leak point.  
Second, find a quiet place (evening), full of gas, and then listen to a quiet circle around the inflatable tent, you will hear the sound of air leaks, and then find the root cause.  
2, repair the leak point:
Need to use tools: pvc materials, glue provided by us. If the leak point is a small hole, you can use a small piece of pvc materials (there is a standard in the inflatable tent of any size), then brush the glue, and stick it to the leak after the glue is dry. The bonding is strict. If the leak is the opening of the air column heat sealing joint parts, it can be processed in the following steps:
First, clean the bonding surface first.
Second, the repair kit we will send with the tent together,and the repair kit with have a  glue, brush it on the pre-adhesive surface, must be evenly painted, the thickness is appropriate, after brushing twice, you can bond.
Third, the shape of the adhesive interface must be designed to be circular or elliptical, try to avoid the shape of the square and acute angle interface, the overlap width should not be less than 30mm.
4. After the glue has evaporated, the bonding can be carried out. The patch must be flat, without wrinkles,roller pressure, scraping, and at the same time using a hair dryer to provide a heat source, easy to stick after 6 hours of bonding, it can be inflated. (Note: When repair the leak point the glue must be dried before bonding, the time is about 10-20 minutes)

1、free design

2、free repair kit and the After- sale Service 

Company Features
1. Among the competitors who manufacture inflatable marquee for sale , Guangzhou JOY Inflatable Limited can be described as one of the pioneers in this field. The factory has introduced all kinds of highly precise manufacturing facilities and complete testing equipment. These machines and equipment are invested with a high level of automation, which directly contributes to increased productivity.
2. We have a team of product experts. They get involved in technical sales and product development with years of industry expertise and foresee trends of user requirements.
3. Our company has achieved numerous honors awarded by the municipal. We are credited as the high-integrity enterprise, quality trustworthy organization, and the creditable unit keeping the promise. We regard green production as one of our major business plans. From now on, we will work together with peers to seek more sustainable and environment-friendly production technologies.