JOY inflatable inflatable man design for kids

Company Advantages
1. In terms of the design, the inflatable man is very competitive.
2. The product has overload protection function for its components. During the design, it is built with a thermal overload relay to guard against the damage caused by long-term overload operation.
3. Whether it is the exquisite piping, beautiful embroidery or fine fabrics, each detail of this product makes it one in a million.
4. The inflatable man are all qualified in JOY inflatable.
5. Guangzhou JOY Inflatable Limited can produce samples according to the design drawings and samples provided by customers.

All kinds outside activities

1.For party event     2. wedding       3. As a store       4.exhibition 

Sewing machine for the inflatable model  gas column with oxford fabric double-sided coated cloth, tarpaulin waterproof, anti-ultraviolet materials, with fast forming, high strength, fire, mildew, anti-ultraviolet, moisture Etc. Tent for the inflatable tent, tent frame for the gas column structure, compared with the general metal bracket tent, with a light, folded after the small size, easy to carry and so on.

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-Sale service 

Company Features
1. Equipped with modern production lines, Guangzhou JOY Inflatable Limited is mainly engaged in the production of inflatable man .
2. Guangzhou JOY Inflatable Limited has strong scientific research and technical strength.
3. We have established a powerful culture. Every one of our employees is committed to finding new ways to do things faster more cost-effectively and to push the boundaries of our potential. We are cultivating a working environment that gives our team room and freedom to be themselves and work in a way that strengthens and adds value to our relationships. Customer-orientation is our first and foremost principle. We think locally with regard to our clients' market conditions so as to produce distinctive products that appeal to local tastes. As the company philosophy, honesty is our first principle to our customers. We promise to abide by the contracts and offer clients the actual products that we promised.