JOY inflatable inflatable garden tent customized for outdoor

Company Advantages
1. The production of JOY inflatable giant inflatable igloo abides by the international quality standards. Ou products are of high durability and stability
2. Using this energy-keeping product helps saving money on electricity cost. For a household, enterprise, industry, the overall benefits of the product outweigh the initial cost. All the materials we used are based on the international standard
3. The product is of high quality and can withstand stringent quality and performance tests. Our products enjoy 3-5 years warranty

All kinds outside activities.  1.For party event.  2. wedding.  3. As a store.  4.exhibition.

All sewing inflatable products are made by high precision machines and using unique 12 in one waterproof nylon threads . We use double stitching for both inside and outside of the products and quadruple stitching for the force loading bottom . For each corner and connection, there are reinforce straps to make sure the product are safe enough for all wind and tension . The length of each single sewing needle is 3mm-8mm

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free to design 

2、free repair material and repair video

Company Features
1. Our plant is strategically located in China Mainland. This location is really advantageous to our production because it is near to the raw material center.
2. JOY inflatable will develop better based on the principle of inflatable garden tent for business. Please contact.