JOY inflatable inflatable bounce house manufacturers for kids

Company Advantages
1. JOY inflatable inflatable bounce house is made of high-quality timber. Its door rail, heart board, edge materials are all sourced in line with high quality, for example, any material contains insect attack, cupping, knot, or rupture will not be adopted. Ou products are of high durability and stability
2. The product is regarded as a must-have one in modern people's life. It contributes to a high working efficiency in people's daily life. Our products enjoy 3-5 years warranty
3. The product features stable performance. The proportions of the various raw materials are carefully mixed together to achieve consistent properties. Our products are designed by the first-rate designers
4. The product can light up instantly. Its high-intensity illuminating elements can not only withstand the impact of instantaneous current but also enter the normal working state for the first time. All our products conform to EN14960 standard
5. The product has a shiny appearance. It has been polished to reduce the surface roughness while obtaining flatness. Our products are of excellent weather resistance which prolong the service life

All kinds outside activities.  1.For party event.  2. wedding.  3. As a store.  4.exhibition.

All sewing inflatable products are made by high precision machines and using unique 12 in one waterproof nylon threads . We use double stitching for both inside and outside of the products and quadruple stitching for the force loading bottom . For each corner and connection, there are reinforce straps to make sure the product are safe enough for all wind and tension . The length of each single sewing needle is 3mm-8mm

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free to design 

2、free repair material and repair video

Company Features
1. Guangzhou JOY Inflatable Limited is the manufacturer of the instant inflatable marquee . The cornerstone of our success is our deep industry experience and expertise.
2. Guangzhou JOY Inflatable Limited has always set high demand on quality from material selection to package.
3. Guangzhou JOY Inflatable Limited has great dream to become a competitive inflatable bounce house supplier. Please contact.