JOY inflatable hot selling inflatable slip and slide manufacturer for children

Company Advantages
1. The materials employed in the production of JOY inflatable inflatable slip and slide is up to the international standard.
2. The rigorous testing procedures ensure that the product quality is consistently at its best.
3. With so many advantages, the product is considered to have a wide range of market applications.
4. The product offers significant economic benefits and is now increasingly popular in the market.

All kinds outside activities.  

everywhere from the backyard to a resort or campground , hillside  b

Air tight technology: Welder by Miller machine in high steam and reinforcement at joint part . .

Features : only once inflate

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design
2、free repair kit and After-sale Service 

Company Features
1. JOY inflatable acts as the pioneer in inflatable slip and slide industry.
2. Guangzhou JOY Inflatable Limited has a sound quality management system, and a complete quality inspection method to ensure the company's quality and reputation.
3. Guangzhou JOY Inflatable Limited hopes to develop into an exceptionally influential enterprise to make blow up water slide inflatable slide blow up slide. Contact! Guangzhou JOY Inflatable Limited spares no effort to improve the standard of inflatable pool slide with quality support. Contact! 'Client First' has always been the business theory that Guangzhou JOY Inflatable Limited sticks to. Contact! Doing the best blow up slip and slide is the common pursuit and ideal of JOY inflatable. Contact!