JOY inflatable giant balloons from China for outdoor

Company Advantages
1. The manufacturing processes of JOY inflatable custom advertising balloons involve a range of aspects. They are pattern design, fabric sourcing, fabric spreading, cutting, cutting parts sorting, sewing, as well as quality inspection and testing.
2. The product is not affected by the humid environment. All of its electric components are finely sealed inside the housing, which makes them not be damaged by the external conditions.
3. There is less component waste generated to the environment by this product because it has a very simple yet powerful design.
4. This product focus on saving time for people. It means that people don't have to take too much time to finish their work or enjoy a high level of living standard.

All kinds outside activities

1.For party event     2. wedding       3. As a store       4.exhibition      5.Advertising

Sewing machine for Cube silver tent and high-frequency heat combined for dome tent with the process of production, gas column with PVC double-sided coated cloth, tarpaulin waterproof, anti-ultraviolet materials, with fast forming, high strength, fire, mildew, anti-ultraviolet, moisture Etc. Tent for the inflatable tent, tent frame for the gas column structure, compared with the general metal bracket tent, with a light, folded after the small size, easy to carry and so on.

How to install  the inflatable sofa ?                                                                                                                                                          

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-Sale service 

Company Features
1. Guangzhou JOY Inflatable Limited mainly supplies full range of high quality giant balloons .
2. With our high product quality and good brand reputation, our long-term customers give very good comments to us and nearly 90 percent of them have been cooperating with us for more than 5 years.
3. Guangzhou JOY Inflatable Limited persists in the custom advertising balloons service concept. Inquire! Building trust is the key to building long-term cooperation relationships to Guangzhou JOY Inflatable Limited. Inquire!