JOY inflatable freestanding inflatable race arch factory price for children

Company Advantages
1. JOY inflatable custom inflatable arch becomes a finished product after a series of stages, such as material preparation, CAD designing, material cutting, sewing, pattern making, and quality inspection.
2. With our design team's continuous efforts, inflatable race arch,custom inflatable arch has been given an aesthetically-pleasing appearance design.
3. The quality is the key to the victory of this product in market competition.
4. People will find this product is the best choice for a tent which is designed specifically for the tent rental and party rental industry.

All kinds outside activities

1.For party event     2. wedding       3. As a store       4.exhibition 

Technology : Sewing : we adopt special double needle strong thread sewing anywhere and quadruple stitching in positions sustaining much force and pressure for the inflatable arch  .

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-Sale service 

Company Features
1. With strong capacities of R&D, production, and marketing of custom inflatable arch , Guangzhou JOY Inflatable Limited has been maintaining its dominance in the market.
2. Guangzhou JOY Inflatable Limited has a strong technical force and a stable technical backbone.
3. Customers' trust is JOY Inflatable's driving force for excellence. Ask! Guangzhou JOY Inflatable Limited firmly believes excellence comes from long-term accumulation. Ask! We give our meticulous attention to the your needs on inflatable race arch. Ask!