JOY inflatable bubble bedroom personalized for outdoor

Company Advantages
1. JOY inflatable buy bubble tent goes through a meticulous design stage. Traditional methods of making, as well as innovation and experimentation with materials, cut and construction, are vital to this process. Our well-selected materials are good enough to satisfy the standards of EN71
2. After investigating the consumer groups and consumer demand, Guangzhou JOY Inflatable Limited targets consumption at medium and high levels. What's more, our products are anti UV
3. The product is highly resistant to impact and vibration. It is built with a strong housing that can prevent damage to the electric components. All our products conform to EN14960 standard
4. The product is characterized by its self-lubrication. The end face of the product has a high surface finish and flatness which facilitates the lubrication. Ou products are of high durability and stability
5. The product is high in mono-mineral content, which means it is high in purity. The purity is mainly determined by the extraction and grinding workmanship. JOY can customize the specification, package, color and height of the products

All kinds outside activities.  1.For Romantic theme hotel   .  2. backyard house.  3. camping.

heat welding machine : High precision heat welding machine and elaborated welding work for the inflatable bubble tent .we can perfectly seal all the material pieces together into any reasonable inflatables, and heat weld all of our airtight inflatables with top quality standard with high efficiency 

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free to desige fee

2、free repair material and repair video

Company Features
1. As a renowned manufacturer producing quality buy bubble tent , Guangzhou JOY Inflatable Limited is developing rapidly to take superiority in the market through its quality and competitive prices.
2. We boast extensive and sophisticated facilities. They promote standardized production under systematic management, thus making sure the company can continue to supply premium products.
3. JOY inflatable has been constantly growing the service quality to enhance the satisfaction of foreign and domestic clients.