JOY inflatable bridge floating water park supplier for children

Company Advantages
1. During the design of JOY inflatable floating water park , advanced equipment is used, including CAD, cutting plotter, cutting machine, and sewing machine, which are conducted by specifically skilled workers.
2. The product is tested by our QC team who regards the testing as an important factor of product performance. Thus, the conducted testing is highly in line with international testing standards.
3. This piece of furniture will complement other furniture, improve the space design and make the space comfortable without overloading it.
4. Dressing this product will be a great experience. It will not easily cause problems related to the skin, such as itching, irritation, stiffness, or clinging.

Reinforcement. We make reinforcements at every weak points like welding seams

Features : only once inflate by the air pump .

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the slide  on the ground .
5.Connect the air inlet of inflatable slide and the outlet of air pump tightly.
6.When the blower switched on, inflatable slide and the support will be inflated within 2 minutes (depend the size  ).
7.Connenct the water slide and the support . and then install it with the yacht .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 
2、free repair kit and After sale-service 

Company Features
1. Guangzhou JOY Inflatable Limited has been producing outdoor inflatable water park for many years. By developing and producing more new products, we are regarded as one of the most robust manufacturers.
2. We boast multi mature production lines with world-advanced technology, with a high annual production capability. This proofs that we have realized complete and scale operation.
3. Guangzhou JOY Inflatable Limited is devoted to transforming itself into a harmonious, long-lasting and water park obstacle course company. Please contact us! According to floating trampoline for sale , Guangzhou JOY Inflatable Limited fully plays the motivation and leadership of floating water park . Please contact us! Enriching people's life is the mission of JOY inflatable. Please contact us!