JOY inflatable blower inflatable arch factory price for children

Company Advantages
1. inflatable arch exceed other similar products due to its inflatable start finish line.
2. This product has a high water treating effect. Its built-in ultrafiltration system can filter out the worthless and harmful suspended solids or other contaminants.
3. The product features inherent overheating protection. It has one output channel serving as protection against overheating produced by the product.
4. The product has been widely used in the global market due to its high economic return.
5. The product is highly suitable for various applications.

All kinds outside activities

1.For party event     2. wedding       3. As a store       4.exhibition 

Technology : Sewing : we adopt special double needle strong thread sewing anywhere and quadruple stitching in positions sustaining much force and pressure for the inflatable arch  .

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-Sale service 

Company Features
1. With rich experience of inflatable arch projects, Guangzhou JOY Inflatable Limited is more and more trusted by customers.
2. Guangzhou JOY Inflatable Limited is technologically leading as a inflatable race arch manufacturer.
3. Centering on high quality, Guangzhou JOY Inflatable Limited hopes to serve every customer well. Welcome to visit our factory! With a strong sense of responsibility, JOY inflatable now has been following the rules to serve customers well. Welcome to visit our factory!