JOY inflatable blow up slip and slide series for child

Company Advantages
1. A wide range of performance and mechanical tests are performed on JOY inflatable water slides for kids to ensure quality. They are static loading test, stability check, drop test, assembly check, etc.
2. The product is safe to use. Because if the blower is suddenly cut off, the product will deflate slowly instead of coming down all at once.
3. Guangzhou JOY Inflatable Limited is committed to provide swift delivery, full quality service and tracking service for its costumers.

All kinds outside activities.  

it must be built up on a slipe with 15-30 angles ,both street and hill 

The slip n slide is a classic backyard activity. That’s why we offer commercial slip n slides for summer camps, resorts and homes that take this time-honored concept and we put our own adventurous twist on it. 

Sewing machine technology: double stitching everywhere and strong reinforcement at joint part .

Features : work with the blower all the time

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the slide on the ground .
5.Connect the air inlet of inflatable slide and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable slide will be inflated within 2-5 minutes (depend the size of the slide ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 
2、free repair kit and After sale-service 

Company Features
1. Guangzhou JOY Inflatable Limited mainly provides blow up slip and slide and related products, and overall solutions.
2. JOY inflatable pays attention to the application of water slides for kids technology.
3. We achieve sustainable development through production waste minimization. By improving or changing processes, by-products, edge trims or off-cuts are reduced or even eliminated. This makes a great difference in waste production. Our objective is to provide top-notch manufacturing options that make clients' products stand out with fashion and be recalled. Diversity and inclusion have brought tremendous value to our company. We will ensure that a diverse workforce will be set up to promote our business. We always stick to the high ethical standards in business dealings. We will make our behaviors in compliance with laws and regulations, and avoid any kind of breaking promises behaviors.