Custom Inflatables Factory professional custom inflatable tents and inflatable water park- Joy Inflatable
|Materials||Durable 0.55mmPVC 840D /18.5OZ PVC coated vinyl which is waterproof ,fireproof and u/v protected|
|Inflate and Deflate||Easy to install and take down|
|Sewing machine technology: double stitching everywhere and strong reinforcement at joint part .|
|Features : work with the blower all the time|
|Printing||Logo printed by Digitally printing or Silk-screen printing|
|Air Pump(airtight product)||Air pump with CE/UL certificates, 110V/220V, various powers|
|Accessories||Blower or air pump , repair Kit ,Glue ,Carry bag （for free )|
|Inflatable product is packed by heavy-duty PVC carry bag;|
|air blower/ air pump is packed by exported standard carton.|
The inflatable water slip N slide is m 17 long and 1.8 m width with 2 lanes (of course it can be single laneas well as triple ) is made by 0.55mm PVC tarpaulin which is strong tension Because the slide is with sewing workmanship so it need 1 air blower to inflate the time during the use .
Depend upon this tyle inflatable city water slide , it must be built up on a slipe with 15-30 angles ,both street and hill , so that people can freely slide to the end with water .Climb up ,tumble down ,shake yourself off and try again , onece your are successful and reach the top of the city slide you are reagy to slide down . Of course you can add some soap foam on the slide to make it more smooth and Slippery or all kinds of swim ring to push you fast to slide.In addition , when people are playing , you need to sparay water with the water pipe . All the inflatable slides manufactured by Guangzhou Joy Inflatable Limited are so much fun for kids as well as big-kids wanting to have a blast. All of our inflatable slides are suitable for a variety of ages.
All kinds outside activities.
it must be built up on a slipe with 15-30 angles ,both street and hill
The slip n slide is a classic backyard activity. That’s why we offer commercial slip n slides for summer camps, resorts and homes that take this time-honored concept and we put our own adventurous twist on it.
◪With 0.55 mm PVC 840 D+0.6mm PVC which is waterproof and fireproof.
◪High grade PVC net cloth USES environmental protection 3P raw material, non-toxic and tasteless, anti-uv, anti-aging, flame retardant, meet international standard.
◪PVC net cloth is a product that is made of transparent PVC film and grid cloth. It can clearly see the middle net cloth through PVC film.
◪ It has a strong three-dimensional feeling and feel soft and hard. It belongs to environmental protection and low toxicity products.
◪All new material production, used all year round outdoors for 3-5 years!
Sewing machine technology: double stitching everywhere and strong reinforcement at joint part .
Features : work with the blower all the time
With inflatable bottom
1.To find space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the slide on the ground .
5.Connect the air inlet of inflatable slide and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable slide will be inflated within 2-5 minutes (depend the size of the slide ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .
If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.
2、free repair kit and After sale-service
Copyright © 2019 GUANGZHOU JOY INFLATABLE LIMITED | All Rights Reserved Design by www.joyinflatable.com
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.