JOY inflatable blow up marquee personalized for children

Company Advantages
1. CAD lofting software is exclusively used in the design of JOY inflatable blow up marquee in the preliminary stage. Its size and shape accuracy can be guaranteed by this precise software.
2. blow up marquee has such features as inflatable shelter tent .
3. The product is widely used in various industries.
4. Due to its excellent characteristics, this product is well received by customers and is used more and more in the market.

All kinds outside activities

1.For party event     2. wedding       3. As a store       4.exhibition 

Sewing machine for Cube silver tent and high-frequency heat combined for dome tent with the process of production, gas column with PVC double-sided coated cloth, tarpaulin waterproof, anti-ultraviolet materials, with fast forming, high strength, fire, mildew, anti-ultraviolet, moisture Etc. Tent for the inflatable tent, tent frame for the gas column structure, compared with the general metal bracket tent, with a light, folded after the small size, easy to carry and so on.

How to install  the inflatable tent ?                                                                                                                                                                              

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-sale service 

Company Features
1. JOY inflatable enjoys high brand popularity among customers by reliable quality blow up marquee .
2. Having achieved high quality and low cost, inflatable marquee tent development is rapid which is a qualitative leap for JOY inflatable.
3. Guangzhou JOY Inflatable Limited places itself as a long-term spouse from the inflatable marquee field. Call! We are fully prepared to serve customers with inflatable cube marquee . We're a professional Inflatable cube tent provider who plans to earn a wonderful influence in this market. Call! Guangzhou JOY Inflatable Limited is successful through continuous efforts to provide greater value to customers. Call!