JOY inflatable blow up marquee manufacturers for outdoor

Inflatable Shade Hanger Tent For The Outdoor Movie . Comparing with the steel shade hanger, our inflatable tent is easier to move for your everywhere outdoor events . It will take in a short time in 1 mins to set it up and about 5 mins to deflate and fold it and put back to the package bag , and moveable to different place as requested, it can stand up after inflated by air blower. It need the air blower to inflate continually .

Four columns are with hole which are for you put the sand bag inside to fix the tent on the ground and the holes are closed by the zip and the velcro . Each corner of the top of the tent is with D anchors for you use the rope to make the tent is more steady .  

For the roof of the inflatable tent we weld the pvc tarp on the every joint part to make sure the tent is waterproof . The back side wall is with long zip for you to open it and put all the projection equiment . The front is with customized logo or words print . 

  . 

All kinds outside activities.  1.party .  2.sunshade .   3.exhibition 

                           

Workmanship 

1..All of our inflatable tent are manufactured to be safe and durable. Providing double stitching everywhere and quadruple in areas of high tear and at bottom stress point to make sure the inflatables are strong  . All the joint part of the roof of tent tent are with transparent pvc tarp to make sure the inflatable tent is waterproof .

                           

light weight oxford fabric materials 

This inflatable tent is with the oxford fabric materials which is very light weight . So it is more durable easily be assembled and disassembled . Take it to everywhere you have the event .

                           

D anchor

We have make anchor in the bottom and roof for you fix the tent on the tent and the D anchor inside the tent are for you hang the light or wire .

Sewing machine for Cube silver tent and high-frequency heat combined for dome tent with the process of production, gas column with PVC double-sided coated cloth, tarpaulin waterproof, anti-ultraviolet materials, with fast forming, high strength, fire, mildew, anti-ultraviolet, moisture Etc. Tent for the inflatable tent, tent frame for the gas column structure, compared with the general metal bracket tent, with a light, folded after the small size, easy to carry and so on.

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 
2、free repair kit and the After-sale service