JOY inflatable blow up dome customized for child

Company Advantages
1. JOY inflatable blow up dome is made with great care. Its aesthetic follows space function and style, and the material is decided based on budget factors. Our products have been sold to over 60 countries including Japan, France, America and etc
2. The product is highly demanded in the market, showcasing its broad market prospect. What's more, our products are anti UV
3. The product is completely examined by the quality testing department. Excellent tensile and tear also makes our products outstanding
4. In order to achieve high performance, the product is formulated the strict quality control system and the operation flow. Ou products are of high durability and stability

All kinds outside activities.  1.For party event.  2. wedding.  3. As a store.  4.exhibition.

All sewing inflatable products are made by high precision machines and using unique 12 in one waterproof nylon threads . We use double stitching for both inside and outside of the products and quadruple stitching for the force loading bottom . For each corner and connection, there are reinforce straps to make sure the product are safe enough for all wind and tension . The length of each single sewing needle is 3mm-8mm

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free to design 

2、free repair material and repair video

Company Features
1. Guangzhou JOY Inflatable Limited has strong technical strength and staff equipment to help the company develop.
2. We put great emphasis on technology of blow up dome .
3. Our company has a mission of Always Advancing to Protect What's Important and is committed to building a more sustainable future. Our No. 1 priority is safety and with continuous improvement in our safety practices, we have reduced the incident rate far below the industry average.