JOY inflatable blobbing inflatable clear dome tents for outdoor and camping personalized for children

Company Advantages
1. JOY inflatable inflatable lawn tent bubble is produced using high-end textile manufacturing equipment. For example, bale breakers, blow room machine, cards, roving frames, or combing machine are adopted at different production stages.
2. The product is safe enough to use. It is equipped with a state-of-the-art circuit and it can detect electrical dangers in each working process.
3. Guangzhou JOY Inflatable Limited is able to provide customers with good products, excellent technical support and perfect after-sales service.

All kinds outside activities.  1.For Romantic theme hotel   .  2. backyard house.  3. camping.

heat welding machine : High precision heat welding machine and elaborated welding work for the inflatable bubble tent .we can perfectly seal all the material pieces together into any reasonable inflatables, and heat weld all of our airtight inflatables with top quality standard with high efficiency 

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free to desige fee

2、free repair material and repair video

Company Features
1. Guangzhou JOY Inflatable Limited is a Chinese company. Our meticulous attention to inflatable lawn tent bubble design and manufacturing makes us trustworthy.
2. Our employees share the same values and enforce the same standards of quality, efficiency, and customer satisfaction on which we have built our reputation.
3. We adopt the concept of buy transparent bubble tent to invite all the friends to come forward together in inflatable clear dome tents for outdoor and camping industry. Please contact. Guangzhou JOY Inflatable Limited continues to invest in clear igloo tent , technologies, basic research, engineering capabilities and standards to better service all costumers. Please contact. Guangzhou JOY Inflatable Limited will play a role in the development of high quality bubble lodge . Please contact.