Inflatable CoronaVirus Medical Isolation Tent Emergency Shelter

Inflatable medical tents are hitting the emergency, medical sector and the military . Our inflatable tent it is easy to manage only require two people to set up and can be prepared in a short span of a few minutes by air pump .Main parts are made by high frequency heat sealing process keep durability and long term lifetime One inflatable medical tent is with several separated rooms so it can good at the quarantine of the patients. It has a wide rang of  applications such as first  aid , rescue , mobile hospital red cross event and military . 

All kinds outside activities.  1.For medical event.  2. emergency .   3.military

                           

Windproof 

The inflatable dome tent itself is very heavy to stand stably, we make D rings and match ropes for you to tie for more stability. You can also use sand bags or water bags to increase stability. However, please use depending on actual scene

                           

Waterproof 

0.6mm PVC tarpaulin is waterproof and the airtight inflatables are made with high temperature multifunctional welding machine, which is necessary and efficient for massive waterproof airtight inflatables 

                           

logo print 

We can print your logo, slogan or other messages on the tent. You'll be visible from all directions, regardless where your tent is located. That gives you up to six times more promotional space than an ordinary sign, plus the advantages of having an eye-catching dome. 

heat welding machine : High precision heat welding machine and elaborated welding work for the water park  .we can perfectly seal all the material pieces together into any reasonable inflatables, and heat weld all of our airtight inflatables with top quality standard with high efficiency

handles, anchor rings are welded  

VS

handles, anchor rings stick with glue

pressure; Air relief valve; Intake valve

VS

only with intake valve when Sharp differences in temperature the product will be easy to burst

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free to desige fee.
2、free repair material and repair video.