Giant giant blow up water slide wholesale for child

Company Advantages
1. The manufacture of JOY inflatable giant blow up water slide involves some critical processes. These stages include concept confirmation, metal materials procurement, frame fabrication, components machining, surface painting, and final assembly. Our well-selected materials are good enough to satisfy the standards of EN71
2. Every aspect of the pricing and availability of the inflatable slip and slide in giant blow up water slide had been calculated to make it a highly sought product. Our products have been sold to over 60 countries including Japan, France, America and etc
3. The main character of the inflatable slip and slide is that it has giant blow up water slide . We can print your logo, slogan or other information you ask for

All kinds outside activities.  

everywhere from the backyard to a resort or campground , hillside  b

Air tight technology: Welder by Miller machine in high steam and reinforcement at joint part . .

Features : only once inflate

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design
2、free repair kit and After-sale Service 

Company Features
1. Guangzhou JOY Inflatable Limited enjoys its great popularity in the field of inflatable slip and slide .
2. Guangzhou JOY Inflatable Limited makes extensive use of its professional engineers and technicians.
3. Guangzhou JOY Inflatable Limited has been making its effort to accomplish the goal of being a national company. Inquiry!