Tente à auvent gonflable mobile

 

Our Inflatable Portable Dome Tent is an excellent choice for outdoor events, sales promotions, and concerts, providing a reliable and stylish stage cover.

Crafted from 0.4mm anti-UV, high-strength PVC tarpaulin, this tent is durable, weather-resistant, and easy to clean, ensuring long-lasting performance.

For added stability and ease of use, D-anchors are strategically placed on all corners both inside and outside, allowing for secure tethering with ground stakes 

 

All kinds outside activities  1.For party event  2. concert   3.Sport   4.exhibition.

                           

IMPERVIUS  

We apply heat-sealed waterproof strips at key areas of the structure to ensure maximum water resistance , allowing your event to proceed smoothly, regardless of the weather.

                           

Inside 

Unless otherwise specified, our inflatable tents are designed without a groundsheet , allowing for direct installation on the ground. Each tent is equipped with multiple D-anchors on both the interior and exterior walls , ensuring secure and stable placement for any event 

                           

Velcro logo 

2. If the inflatable tent's pressure is too soft, arrange for all people evacuation ,and then to check there if there are leaks and torn holes.

3.During the tent inflating if you find the tent can’t stand up by itself  please in virtue of manpower to help it stand up .

 We attach the mobile logo to the tent using Velcro , allowing you to easily change it to match the theme of your event.

If the inflatable tent's pressure is too soft, arrange for all people evacuation ,and then to check there if there are leaks and torn holes.

3.During the tent inflating if you find the tent can’t stand up by itself  please in virtue of manpower to help it stand up .

If the inflatable tent's pressure is too soft, arrange for all people evacuation ,and then to check there if there are leaks and torn holes.

3.During the tent inflating if you find the tent can’t stand up by itself  please in virtue of manpower to help it stand up .

2. If the inflatable tent's pressure is too soft, arrange for all people evacuation ,and then to check there if there are leaks and torn holes.

3.During the tent inflating if you find the tent can’t stand up by itself  please in virtue of manpower to help it stand up .

2. If the inflatable tent's pressure is too soft, arrange for all people evacuation ,and then to check there if there are leaks and torn holes.

3.During the tent inflating if you find the tent can’t stand up by itself  please in virtue of manpower to help it stand up .

2. If the inflatable tent's pressure is too soft, arrange for all people evacuation ,and then to check there if there are leaks and torn holes.

3.During the tent inflating if you find the tent can’t stand up by itself  please in virtue of manpower to help it stand up .

heat welding machine : High precision heat welding machine and elaborated welding work for the water park  .we can perfectly seal all the material pieces together into any reasonable inflatables, and heat weld all of our airtight inflatables with top quality standard with high efficiency 

handles, anchor rings are welded  

VS

handles, anchor rings stick with glue

pressure; Air relief valve; Intake valve

VS

only with intake valve when Sharp differences in temperature the product will be easy to burst

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、liberum design 

II, libero interdum ornamentum et post-venditionis servitium