Joy Inflatable - Custom Inflatables Factory for custom inflatable tents and inflatable water park
Materials | Durable 0.9mm PVC 1000D /18.5OZ PVC coated vinyl which is waterproof ,fireproof and u/v protected | |
Warranty | 3-5 years | |
Inflate and Deflate | Easy to install and take down | |
Workmanship | Air tight technology: Welder by Miller machine in high steam and reinforcement at joint part . | |
Features:100% waterproof ;only once inflate ,airtight | ||
Printing | Logo printed by Digitally printing or Silk-screen printing | |
Air Pump(airtight product) | Air pump with CE/UL certificates, 110V/220V, various powers | |
Accessories | Blower or air pump , repair Kit ,Glue ,Carry bag (for free ) | |
Package | Inflatable product is packed by heavy-duty PVC carry bag; | |
air blower/ air pump is packed by exported standard carton. |
Traditional slip n slides can be fun — but the commercial grade slip n slides you will find here at Joyinflatable are on a whole new level. Joyinflatable is the proud provider of the Super Sweet Slide 30 meter long and 3 meter wide, ultra-slick slide that is perfect for everywhere from the backyard to a resort or campground , hillside . The slip n slide is a classic backyard activity. That’s why we offer commercial slip n slides for summer camps, resorts and homes that take this time-honored concept and we put our own adventurous twist on it.
All kinds outside activities.
everywhere from the backyard to a resort or campground , hillside b
◪All new material production, used all year round outdoors for 3-5 years!
Air tight technology: Welder by Miller machine in high steam and reinforcement at joint part .
Features:100% waterproof ;only once inflate ,airtight
1.To find space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .
If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.
1、free design
2、free repair kit and After-sale Service
Copyright © 2019 GUANGZHOU JOY INFLATABLE LIMITED | All Rights Reserved Design by www.joyinflatable.com | xml
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.