blow up slip and slide manufacturer for children JOY inflatable

Company Advantages
1. JOY inflatable giant blow up water slide has gone through many quality tests, namely, load test, strength test for the flexible material, flame retardant test, height safety test, etc. JOY can customize the specification, package, color and height of the products
2. Guangzhou JOY Inflatable Limited offers the value proposition: low prices, great service and fast delivery. We use high quality and high standard materials
3. The product is accredited to several recognized standards, such as ISO quality standard. And our products can be installed very easily
4. This product is guaranteed to be stable and reliable. All our products conform to EN14960 standard
5. The product has been tested for performance and durability. Our products are designed by the first-rate designers

All kinds outside activities.  

everywhere from the backyard to a resort or campground , hillside  b

Sewing machine technology: double stitching everywhere and strong reinforcement at joint part .

Features : work with the blower all the time

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design
2、free repair kit and After-sale Service 

Company Features
1. Guangzhou JOY Inflatable Limited is an integrated manufacturer in China. We develop and manufacture giant blow up water slide and provide sales and support service. The quality assurance of blow up slip and slide also relies on the powerful technical power of JOY inflatable.
2. Guangzhou JOY Inflatable Limited has been centered on the development technology of blow up water slide inflatable slide blow up slide.
3. The expert R&D foundation has greatly improved inflatable water slide . JOY inflatable has always followed the rules of customer first. Call now!