blow 5 man inflatable tent for sale for child

Company Advantages
1. JOY inflatable blow up igloo party follows advanced techniques to eliminate waste. All our products conform to EN14960 standard
2. This product can avoid the uncomfortable feeling of sweating when waking up in the middle of the night. The high quality materials of PVC are adopted to manufacture products
3. The product has good color retention. It is not likely to fade when exposed to sunlight or even in the scuffs and wear areas. All the materials we used are based on the international standard

All kinds outside activities.  1.party .  2.sunshade .   3.exhibition 

Sewing machine for Cube silver tent and high-frequency heat combined for dome tent with the process of production, gas column with PVC double-sided coated cloth, tarpaulin waterproof, anti-ultraviolet materials, with fast forming, high strength, fire, mildew, anti-ultraviolet, moisture Etc. Tent for the inflatable tent, tent frame for the gas column structure, compared with the general metal bracket tent, with a light, folded after the small size, easy to carry and so on.

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable exhibition tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable party tent will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 
2、free repair kit and the After-sale service 

Company Features
1. Guangzhou JOY Inflatable Limited is a diversified group company that integrates blow up igloo party . Thanks to sophisticated facilities, not only production efficiency but also quality are significantly improved.
2. Guangzhou JOY Inflatable Limited has independently researched and developed several new 5 man inflatable tent that take leading positions both at home and abroad
3. Guangzhou JOY Inflatable Limited's inflatable work tent are integrated domestic and foreign advanced technologies. JOY inflatable upholds the idea of putting customers first. Welcome to visit our factory!