JOY Inflatable  >  AI - Page Sitemap  >  black blow up tent design for outdoor
black blow up tent design for outdoor

black blow up tent design for outdoor
  • black blow up tent design for outdoor
  • black blow up tent design for outdoor
  • black blow up tent design for outdoor
  • black blow up tent design for outdoor
  • black blow up tent design for outdoor
  • black blow up tent design for outdoor
  • black blow up tent design for outdoor
  • black blow up tent design for outdoor

black blow up tent design for outdoor

The law of heat conduction theory has been adopted in the developing of JOY Inflatable best inflatable tent. It's specially made to allow the heat to be transferred from the higher temperature region to the lower temperature region.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:


Product parameters

bg
MaterialsDurable 0.4 mm white color pvc  /18.5OZ PVC coated vinyl which is waterproof ,fireproof and u/v protected
Warranty3-5 years
Inflate and DeflateEasy to install and take down

 

Workmanship

Sewing machine technology: double stitching everywhere and strong reinforcement at    joint part .
Features : work with the blower all the time
PrintingLogo printed by Digitally printing or Silk-screen printing
Air Pump(airtight product)Air pump with CE/UL certificates, 110V/220V, various powers
AccessoriesBlower or air pump , repair Kit ,Glue ,Carry bag (for free )

 

Package

Inflatable product is packed by heavy-duty PVC carry bag;
air blower/ air pump is packed by exported standard carton.



What is inflatable Inflatable Trade Show Event Tent For Advertising ?

bg
black blow up tent design for outdoor-1

This is Inflatable Inflatable Trade Show Event Tent For Advertising  .We can print any customized logo show on the tent for advertising . The tent is for the starting point for the Dirty Girl Mud Run Event which is a 3.1 mile, 14 obstacle muddy event built to inspire fabulous females to run, walk, climb, jump, and laugh their way, hand in muddy hand, to an unabashed sense of accomplishment.

The tent is made by inflatable tubes and the sing cover pvc materials . So the weight and much light and it was be easy to set up on the ground .




Where is the Inflatable Trade Show Event Tent For Advertising

bg

All kinds outside activities

1.For party event     2. wedding       3. As a store       4.exhibition 

Product show 

bg


black blow up tent design for outdoor-2
                           
Technology

Sewing : we adopt special double needle strong thread sewing anywhere and quadruple stitching in positions sustaining much force and pressure for the tent .

Feature : work with the blower all the time 

black blow up tent design for outdoor-3
                           
easy to install 
You can install or disassemble in a very short time to save you valuable time; better insulation, inflatable tents with high quality pvc waterproof canvas, tear resistance, better tensile strength, anti-aging Better sex, long service life. In the weight and 6 wind load under the safe use of continuous service life of more than 2 years.
black blow up tent design for outdoor-4
                           
Smaller and lighter 

Therefore, compared to ordinary metal bracket tent, the inflatable tent has its unmatched advantages, its light weight, small size, in the transport with ordinary metal bracket tent does not have the advantage. And its erection and removal are very simple, will not waste more manpower and time, especially for emergency response in the emergency use. In the harsh environment can not be reached when the inflatable tent can also be empty.       



Material

bg




Workmanship

bg


Sewing machine for Cube silver tent and high-frequency heat combined for dome tent with the process of production, gas column with PVC double-sided coated cloth, tarpaulin waterproof, anti-ultraviolet materials, with fast forming, high strength, fire, mildew, anti-ultraviolet, moisture Etc. Tent for the inflatable tent, tent frame for the gas column structure, compared with the general metal bracket tent, with a light, folded after the small size, easy to carry and so on.



Certifications

bg


black blow up tent design for outdoor-5
black blow up tent design for outdoor-6


How to install Inflatable Party Marquee ?                                                                                                                                                             

bg


1.Base fabric is laid on the ground and put the inflatable tent on the base fabric and then to inflate the inflatable tent . During the inflation process, the two inflation valves must be inflated at the same time to ensure the simultaneous expansion of each part, and the air columns are not allowed to be knotted. If there is a lack of airflow in the air column, you can use your hand to gently tap a few times. When the air column is raised, several people can help it stretch, and lift the inflatable tent up, prompting the air column to stand up quickly.
2. For the first time of inflating, the air pressure is not allowed to exceed 13.3kpa. After the gas column is fully expanded after 5 mins, the air pressure is raised, but the maximum pressure is not allowed to exceed 20kpa. The inflation pressure can be appropriately increased or decreaed according to the ambient temperature. .

black blow up tent design for outdoor-7



How to do when Inflatable Party Marquee  Leak

bg


1. Check the leak point:
First, clean up the gas column and apply the surface with soapy water to check the leak point.  
Second, find a quiet place (evening), full of gas, and then listen to a quiet circle around the inflatable tent, you will hear the sound of air leaks, and then find the root cause.  
2, repair the leak point:
Need to use tools: pvc materials, glue provided by us. If the leak point is a small hole, you can use a small piece of pvc materials (there is a standard in the inflatable tent of any size), then brush the glue, and stick it to the leak after the glue is dry. The bonding is strict. If the leak is the opening of the air column heat sealing joint parts, it can be processed in the following steps:
First, clean the bonding surface first.
Second, the repair kit we will send with the tent together,and the repair kit with have a  glue, brush it on the pre-adhesive surface, must be evenly painted, the thickness is appropriate, after brushing twice, you can bond.
Third, the shape of the adhesive interface must be designed to be circular or elliptical, try to avoid the shape of the square and acute angle interface, the overlap width should not be less than 30mm.
4. After the glue has evaporated, the bonding can be carried out. The patch must be flat, without wrinkles,roller pressure, scraping, and at the same time using a hair dryer to provide a heat source, easy to stick after 6 hours of bonding, it can be inflated. (Note: When repair the leak point the glue must be dried before bonding, the time is about 10-20 minutes)



Free service

bg


1、free design

2、free repair kit and the After- sale Service 



The production of JOY Inflatable blow up tent consists of two parts, making processing such as extrusion, die casting, and stamping, as well as the deep process such as drilling, milling, and welding.
The surface treatment of JOY Inflatable blow up tent mainly includes degreasing, anodizing, sandblasting, painting, and laser engraving. It has to go through surface inspection to guarantee burr free.
During the developing of JOY Inflatable best inflatable tent, several important factors are considered such as sink level requirements, component level requirements, system level requirements, and chassis level requirements, to achieve the optimized heat transfer effect.
The manufacturing process of JOY Inflatable blow up tent includes profiles extruding, cutting, CNC machining, deburring, and surface treating. All of these procedures have to be inspected by the QC team to meet the highest requirements in the heat sink industry.
In order to meet the standards of the heatsink industry, JOY Inflatable blow up tent has to go through a strict inspection process conducted by precise inspection equipment.
This product has a high yield. Once the design basic parameters and standard specifications are entered into the product, it can perform high-volume daily tasks from start to finish and provide flexible scalability.
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...