How Much Weight Can a Sheetrock Ceiling Hold? - where can i rent a mechanical bull

Sheetrock, also known as gypsum board or drywall, is a common indoor finish in residential buildings.
This is a product with light weight and small load.
Easily marked or damaged.
It is possible to attach additional weight (such as fixtures) to the Sheetrock ceiling--
But the load cannot be supported by the material itself.
Sheetrock is a brand of gypsum board-or boards --
Composed of gypsum core and natural gypsum core
Finish paper and pad paper on the back.
To protect the core, the face paper folds on the edge.
The Sheetrock panel is easy to install, although the tape connection requires tips for a seamless look.
The panels cover the frame and insulation of the interior walls and ceilings, providing a smooth surface for painting.
Gypsum board is valued for its fire
Resistance and versatility but it's not load
Bearing material.
Compression strength--
Ability to withstand pressure--
Traditional 1/2
Inch gypsum board is 400 pounds per square inch (psi), but the rated live load and static load of gypsum board are unqualified.
Attach the weight directly to the ceiling in the form of a fixture, and Sheetrock will increase the pressure in the local area ---
Instead of assigning weight or transferring load throughout the material.
Usually the weight is not applied directly to the shoe cover.
The fixture can be fixed on the bolts behind the gypsum board to transfer the weight to the load
The carrying part of the structure.
The fixture can be made with a support frame that spans the correct distance.
Another way is to use a screw or bolt that is designed with a mechanism that expands as the fastener is tightened or locked behind the wall.
Dry wall anchors and bolts specify the rated load for tension and shear.
Different types of plasterboard manufactured for institutional and commercial use are more robust than typical residential products and have better resistance to surface damage.
The traditional wall covering plaster before gypsum board has a compressive strength similar to that of concrete-
Over 2000 psi. Veneer-
To increase the strength and durability, the coated plaster can be laid and completed on the gypsum board.
The coating can reach a compression strength of up to 4000 psi within days of installation.