Advertising Inflatable water park design for outdoor

Company Advantages
1. JOY inflatable custom made inflatables is developed depending on our strong R&D competencies. Our products have been sold to over 60 countries including Japan, France, America and etc
2. By means of perfect system and advanced management, Guangzhou JOY Inflatable Limited will ensure all production completed on schedule. Guaranteeing the safety of our products is an important quality inspection standard
3. Inflatable water park excels due to its excellent characteristics of custom made inflatables. JOY can customize the specification, package, color and height of the products

All kinds outside activities

1.For party event     2. wedding       3. As a store       4.exhibition 

Sewing machine for the inflatable model  gas column with oxford fabric double-sided coated cloth, tarpaulin waterproof, anti-ultraviolet materials, with fast forming, high strength, fire, mildew, anti-ultraviolet, moisture Etc. Tent for the inflatable tent, tent frame for the gas column structure, compared with the general metal bracket tent, with a light, folded after the small size, easy to carry and so on.

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-Sale service 

Company Features
1. Guangzhou JOY Inflatable Limited is one of the most powerful Inflatable water park suppliers in the field. At present, Guangzhou JOY Inflatable Limited has advanced production lines and various testing equipment for inflatables water islans for sale .
2. In order to offer high-quality air inflatables, JOY inflatable has been equipped with excellent talents and advanced equipment.
3. Inflatable water park is not just a custom made inflatables, but also helps improve the quality of the inflatable advertising , making it better. We believe that a higher degree of customer satisfication needs the high quality Inflatable water park and professional service. Get info!