Print inflatable arch wholesale for child

Inflatable Arch Entrance Door For the Ourdoor Sport Racing Run
is with the size 5M width and 3.5m high . You can see we print the logo directly on the surface of the arch gate .                                                   In the process of establishing a brand and promotion, there is an irreplaceable advertising role, which is easy to form a grand and lively event. The main model manufacturer of the country, “Double Stand Model” manufacturer, it brings people a strong visual impact and a relaxed and pleasant atmosphere, which deepens people's understanding of product image and brand and plays a better publicity effect.

All kinds outside activities

1.For party event     2. wedding       3. As a store       4.exhibition 

                           

Technology

Sewing : we adopt special double needle strong thread sewing anywhere and quadruple stitching in positions sustaining much force and pressure for the tent .

Feature : work with the blower all the time 

                           

Advantage

1. Lightweight, easy to carry, comfortable to use
2. Reusable, easy to clean .
3. Convenient and sturdy vent design for easy inflation and deflation
4. The product can save a lot of space after deflation.

                           

Customized logo 

The countless ,individual desig possiblities in print and shape each inflatable adertising arch is also unique    .

Technology : Sewing : we adopt special double needle strong thread sewing anywhere and quadruple stitching in positions sustaining much force and pressure for the inflatable arch  .

How to install  the inflatable arch?                                                                                                                                                            

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-Sale service