JOY inflatable inflatable transparent tent for sale for child

Our this inflatable dome cinema tent are widely placed in all kinds of indoor or outdoor movie, music party event with different size for tent requirement. All the materials are commercial grade oxford fabric so it is very light weight .White color outside and black color inside is good for you to see the movie . After the event end you can pack in smaller size for moving and storage .It will take about 15 mins to set the inflatable dome tent up on the ground with 2 pieces 1500w air blower .

Our inflatable dome tent are suitable for all weather use (resist the wind  55 mph) and are offered fully custom designs manufactured to fit your specific project and site. 

All kinds outside activities.  1.party .  2.sunshade .   3.exhibition 

                           

Attractive 

Inflatable Dome tent is with dome shape roof it can even handle snow fall and rain so whatever the weather, wherever you are in the world, our inflatable Dome tent is a practical yet striking choice of your event structure.

                           

Application 

Inflatable air dome tent are perfect for events such as product launches, conventions, promotional tours, movie set & film studios, sports or gaming domes, trade shows, festivals, corporate events and weddings The large entire interior space is for you open creativity. 

.

                           

Equirement 

Our inflatable free-standing dome tent can support lighting and sound equipment. And of course, our inflatable air dome tent can be either heated or cooled depending on your event’s location and the outside weather conditions.

All sewing inflatable products are made by high precision sewing machines and using unique 12 in one waterproof nylon threads . We use double stitching for both inside and outside of the product and quadruple stitching for the force loading bottom . For each corner and connection , there are reinforce straps to make sure the product are safe enough for all kinds main stressed area . The length of each single sewing needle is 3mm-8mm.

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable exhibition tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable air dome tent will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 
2、free repair kit and the After-sale service